Grass Valley Trinix NXT v.3.3.1 - Manual (Page 281)

Trinix NXT — Installation and Service Manual 281
Software Installation
Alternate methods for Updating a Compact Flash Cards
Uploading the Broadlinx Software Using NetConfig
Note For more information about the NetConfig application see the NetConfig
Instruction Manual.
The 3.3.1 version of Broadlinx may be copied to the Compact Flash cards
using the 2.0.13 version of NetConfig. Once the flash is updated, the Trinix
matrix web page activate and reboot procedure, as described in Software
Installation
on page 260 , will need to be performed to complete the update
process.
Requirements
• The 2.0.13 version of NetConfig must be used for Broadlinx Software
Update.
• This procedure can be used with the Broadlinx 3.2.0 release and subse-
quent releases. In other words, you will need to manually copy the
entire Broadlinx 3.2.0 file to the Compact Flash disc (CF) if you have the
Broadlinx 3.1.0, and older, release installed.
• This feature cannot be used to downgrade from 3.2.0x to 3.1.0x (or older
releases).
• The Compact Flash should be at least 128MB in size. An error will
appear if a smaller sized flash is used