Grass Valley Trinix NXT v.3.3.1 - Manual (Page 267)

Trinix NXT — Installation and Service Manual 267
Software Installation
Figure 173. The Broadlinx: Updating Firmware Status Window - Update Completed
The Broadlinx web page will then indicate “Post Completed.”
4. Navigate to the Firmware Management page. The Restart button will
now appear near the bottom of the page. (The display may vary from
the example that is shown in
Figure 174 .)
Figure 174. The Restart Button on the Firmware Management Screen
The cards must be restarted to use the new firmware.
5. Click the Restart button, which is shown above in Figure 174 .
The following Caution pop-up window will then appear:
Click this button