Grass Valley Trinix NXT v.3.3.1 - Manual (Page 119)

Trinix NXT — Installation and Service Manual 119
Specifications
Intake : Minimum of 2RU below the Trinix 512x1024 chassis for cool intake air.
Exhaust : Minimum of 3RU above for warm exhaust air. The 3RU area requires a total
exhaust area (top, sides, back or front) of 516 sq. CM (80 sq. in.).
Airflow requirements for chassis : 31 cubic meters/minute (1085 cubic feet /minute).
Physical
Frames
128 x 128 Frames
Main frame: 8 RU: 14 in. high x 19 in. wide x 17.50 in. deep (356 x 483 x 445 mm)
256 x 256 Frames
Main frame: 15 RU: 26.25 in. high x 19 in. wide x 17.5 in. deep (667 x 483 x 445 mm)
512 x 512 Frames
Main frame: 28 RU: 49 in. high x 19 in. wide x 17.5 in. deep (1245 x 483 x 445 mm)
Power supply frame: 4 RU: 7 in. high x 19 in. wide x 21 in. deep (178 x 483 x 533 mm)
128 x 256 Frames
Main frame: 11 RU: 19.25 in. high x 19 in. wide x 17.5 in. deep (489 x 483 x 445 mm)
256 x 512 Frames
Main frame: 22 RU: 38.5 in. high x 19 in. wide x 17.5 in. deep (978 x 483 x 445 mm)
Power Supply frame: 1.71 inches (1 RU) high x 19 in. wide x 17.25 in. deep (43.4 x 483
x 413 mm)
512 x 1024 Frames
Main frame: 40 RU: 70 in. high x 19 in. wide x 17.5 in. deep (1778 x 483 x 445 mm)
Power Supply frame (Two power supplys per frame.): 1.71 inches (1 RU) high x 19 in.
wide x 17.25 in. deep (43.4 x 483 x 413 mm)
Optional TRX-FAV-512x1024 (Front air vent unit) 3.5" (2 RU) high x 19 in. wide x 16.4
in. deep (88 x 483 x 417 mm)
Fans units (one on top, one on bottom): 2 x 1 RU: 1.75 in. high x 19 in. wide x 17.5 in.
deep (44.45 x 483 x 444 mm)
MK-33000 Mounting Kit (for port expansion)
14 inches (8 RU) high x 19 in. 4 in. deep (356 x 483 x 100 mm)