Grass Valley Xplay Vertigo Suite v.5.0 - Manual (Page 19)

2-10 Xplay User Manual
Getting started with Xplay
4. Specify the appropriate General Device Configuration settings:
Device name The name of the selected device. This can only be modified when adding a device.
Device alias An alternative name for the selected device on your network.
Description An optional field that lets you label the device to distinguish it from other similar
devices at your facility (for example).
Device Type Identifies the type of device that these settings apply to.
Choose from:
•
V ERTIGO XG
• I NTUITION XG
• P REVIEW ( OR OTHER DEVICE )
• I MAGE S TORE
• I NTUITION
• FTP
• LGK
• DSK
• HMP
• O THER
N OTE : Always select P REVIEW (or other device) for Software CG devices.
Control IP The network location (IP address) or hostname of the selected device. The host
must be available on the network.
N OTE : The Control IP setting is not displayed when HMP is selected as the device
type.
Control Port The networking port that serves as a channel for sending commands to and from
the device.
N OTE : The Control Port setting is not displayed when HMP is selected as the device
type.
Publish IP The network location (IP address) or hostname of the selected device. The host
must be available on the network.
N OTE : The Publish IP setting is not displayed when V ERTIGO XG, I NTUITION XG or
I NTUITION are selected as the device type.
Publish Port The networking port that serves as a channel for publishing assets. Typically, this
value is set to 15000.
N OTES :
• The Control Port setting is only displayed when P REVIEW , FTP, HMP or O THER
are selected as the device type.
• This value must correspond with the port used by the XpublishAgent on the
output device.