HEIDENHAIN TNC 320 (77185x-01) ISO programming - Manual (Page 118)

Programming: Fundamentals, file management
3.4 Working with the file manager
3
118
TNC 320 | User's Manual for DIN/ISO Programming | 3/2014
Data transfer to/from an external data medium
Before you can transfer data to an external data
medium, you must set up the data interface (see
"Setting up data interfaces", page 475).
Depending on the data transfer software you use,
problems can occur occasionally when you transmit
data over a serial interface. They can be overcome by
repeating the transmission.
Call the file manager
Select the screen layout for the data transfer:
Press the WINDOW key. In the left half of the
screen the TNC shows all files in the current
directory. In the right half of the screen it shows all
files saved in the root directory (TNC:\ ).
Use the arrow keys to highlight the file(s) that you want to transfer:
Moves the highlight up and down within a window
Moves the highlight from the right to the left
window, and vice versa