HEIDENHAIN TNC 320 (77185x-01) ISO programming - Manual (Page 351)

The PLANE Function: Tilting the Working Plane (Software Option 1) 12.2
12
TNC 320 | User's Manual for DIN/ISO Programming | 3/2014
351
Defining the PLANE function
Show the soft-key row with special functions
To reset the PLANE function, press the TILT
MACHINING PLANE soft key: The TNC displays the
available definitions in the soft-key row
Selecting functions
Select the desired function by soft key. The TNC continues the
dialog and requests the required parameters
Position display
As soon as a PLANE function is active, the TNC shows the
calculated spatial angle in the additional status display (see figure).
As a rule, the TNC internally always calculates with spatial angles,
independent of which
PLANE function is active.
During tilting ( MOVE or TURN mode) in the Distance-To-Go mode
( DIST), the TNC shows (in the rotary axis) the distance to go (or
calculated distance) to the final position of the rotary axis.