HEIDENHAIN TNC 320 (77185x-01) ISO programming User Manual
Page 364
Programming: Multiple Axis Machining
12.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
12
364
TNC 320 | User's Manual for DIN/ISO Programming | 3/2014
Input parameters
Axis angle A?: Axis angle
to which
the A axis
is to be tilted. If entered incrementally, it is the
angle
by which
the A axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
to which
the B axis
is to be tilted. If entered incrementally, it is the
angle
by which
the B axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
to which
the C axis
is to be tilted. If entered incrementally, it is the
angle
by which
the C axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties, see
"Specifying the positioning behavior of the PLANE
Abbreviations used
Abbreviation
Meaning
AXIAL
In the axial direction
NC block
5 PLANE AXIAL B-45 .....