HEIDENHAIN TNC 320 (77185x-01) ISO programming User Manual
Page 356
Programming: Multiple Axis Machining
12.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
12
356
TNC 320 | User's Manual for DIN/ISO Programming | 3/2014
Abbreviations used:
PROJECTED
Projected
PROPR
Principle plane
PROMIN
Minor plane
PROMIN
Rotation
Defining the working plane with the Euler angle:
PLANE EULER
Application
Euler angles define a machining plane through up to three
rotations about the respectively tilted coordinate system
. The
Swiss mathematician Leonhard Euler defined these angles. When
applied to the machine coordinate system, they have the following
meanings:
Precession angle:
EULPR
Rotation of the coordinate system
around the Z axis
Nutation angle:
EULNU
Rotation of the coordinate system
around the X axis already shifted by the
precession angle
Rotation angle:
EULROT
Rotation of the tilted machining plane
around the tilted Z axis
Before programming, note the following
Parameter description for the positioning behavior: