Epson EMP-7950 - Manual (Page 142)

141 Maintenance
User’s Guide
• Air filters at side and base of projector
Pull the air filters out from the projector and then use a vacuum cleaner to
clean them.
Replacing Consumables
This section describes how to replace the lamp and the air filters.
It is time to replace the lamp when:
• The message "Lamp Replace." appears on the screen when
projection starts
.
• The indicator is flashing orange
• The projected images get darker or start to deteriorate in quality.
TIP
• If the air filters are broken or if the warning message reappears after
they have been cleaned, they should be replaced. Replace them with
new air filters. See "Appendices: Optional Accessories and
Consumables"
p.151
• Spare lamps are provided with spare air filters. The air filters should
also be replaced when the lamp is replaced.
Lamp Replacement Period
A message will be displayed.
Flashes orange