Epson EMP-7950 - Manual (Page 58)

57
User’s Guide
Adjusting the Volume
You can adjust the volume for the sound from the projector's built-in speaker
or from the external speakers that are connected to the projector.
PROCEDURE
The volume can be adjusted using either the remote control, the projector's
control panel or the configuration menus. This procedure explains how to
use the remote control and the projector's control panel to adjust the
volume.
For adjustment using the configuration menus:
See "Audio" - "Volume"
p.83
Press the [Volume] button on either the remote control or
the projector's control panel.
When the button is pressed to the [ ] side, the volume increases, and when it is
pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being adjusted.
+ - Volume Volume 15 :
Remote control
TIP
• If the value displayed in the gauge on the screen stops changing
when the volume is being adjusted, it indicates that the limit for
volume adjustment has been reached.
• The volume adjustments are stored individually for each image
source.