Epson EMP-7950 - Manual (Page 87)

86 Using the Configuration Menu Functions Using the Configuration Menu Functions
User’s Guide
* If the "Computer Input" and "BNC Input" have been set to "Auto", the projector detects an
image source automatically depending on an input signal.
Sub-menu Function Default
P in P When using the P in P function, this selects whether the
image signals that are projected into the sub-screen are
"Video" or "S-Video". Video
No-Signal
Msg. Sets the message status and background colour at times
such as when no video signal is being input.
When set to "OFF", the background colour becomes black
and no message is displayed.
•To change the user's logo, you need to record your own
logo. p.148
•If the "User's Logo Protect" function of Password Protect
has been set to "ON", the "Logo" setting cannot be
changed to "OFF", "Black" or "Blue", nor can it be
changed from "OFF", "Black" or "Blue" to "Logo". Set
"User's Logo Protect" to "OFF" and then save the new
user's logo.
p.61
Blue
Message Selects whether the image signal name or colour mode
name is displayed on the screen (ON) or not displayed
(OFF) when switching the video signal or colour mode. ON
A/V Mute Sets the screen status when the [A/V Mute] button is
pressed.
p.63
•To change the user's logo, you need to record your own
logo. p.148
•If the "User's Logo Protect" function of Password Protect
has been set to "ON", the "Logo" setting cannot be
changed to "Black" or "Blue", nor can it be changed from
"Black" or "Blue" to "Logo". Set "User's Logo Protect" to
"OFF" and then save the new user's logo.
p.61
Black
Computer
Input Selects the input signal for the source that is connected to
the [Computer] port. Auto *
BNC Input Selects the video signal to match the device that is
connected to the [BNC] port.
Auto *