Epson EMP-7950 - Manual (Page 34)

33 Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-7950 only)
User’s Guide
Disconnecting a USB Device from the Projector
After projection is finished, disconnect the USB device from the projector
using the following procedure.
PROCEDURE
Position the cursor with the "EJECT" button on the
CardPlayer screen and press the [Enter] button on
the remote control to close CardPlayer.
" Showing
the Presentation (Using the CardPlayer) " in the
EasyMP Operation Guide
Disconnect the USB cable or USB storage device
from the projector's [USB Type A] port.
1
CAUTION
Be sure to shut down CardPlayer first before disconnecting a USB
cable or a USB storage device from the projector. If you do not shut
down CardPlayer before disconnecting the USB device, CardPlayer
may no longer operate correctly.
2
CAUTION
When a USB-compatible hard disk drive is connected, disconnect the
hard disk drive or turn the power for the hard disk drive off before
turning the power for the projector off. If this is not done, it may cause
problems with the projector.