Epson EMP-7950 - Manual (Page 72)

71 Functions for Enhancing Projection
User’s Guide
PROCEDURE
While projecting analogue RGB images from a computer,
press the [Preset] button on the remote control to apply
the saved setting values for the "Video" menu to the
images that are currently being projected.
The memorised preset number changes in ascending order starting
from the lowest recording area number each time the button is
pressed.
You must press the [Preset] button while the preset number and input
resolution appear on the screen, otherwise the selection will not
change.
Changing the Resize/Aspect Ratio
When projecting computer images, the display method can be changed
between resized display (in which the images are projected so that they fill
the available projection area) and real display (in which the images are
projected at the resolution of the original input signal).
When projecting computer images, the default method used is resized
display.
PROCEDURE
The display method switches between real display and
resized display each time the [Resize] button on either the
remote control or the projector's control panel is pressed.
Applying Saved "Video" Menu Settings
Remote control
Preset number and input
resolution appear
TIP
• Preset numbers that have not yet been preset will be skipped.
• If no preset settings have been made, the message "No Entry" will
appear when you press the [Preset] button.
Selecting the Computer Display Method
Remote control