Epson EMP-7950 - Manual (Page 75)

74 Functions for Enhancing Projection
User’s Guide
Projector ID/Remote Control ID
If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order to
simultaneously operate projectors with the same ID number. Alternatively,
if you set the remote control ID to "0", all projectors can be operated by the
remote control regardless of the projector ID numbers.
PROCEDURE
Press the [Menu] button on either the remote control
or the projector's control panel, and then select
"Projector ID" from the "Advanced2" menu.
See "Using the Configuration Menus" for details on this operation.
p.96
Registering an ID Number for a Projector
TIP
The default values for ID numbers are "1" for projectors and "0" for
remote controls.
1
Remote control
Brightness Control High Low : Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
Projector ID
Network
Direct Power ON
Operation Lock
Reset Execute
: 1
[Menu]: Exit
Effect
Advanced2
COM Port
BNC Sync Termination ON OFF :
ON OFF :
ON OFF :
Set
Set
[ / ]: Select [ ESC ]: Return [ ]: Set
Auto Setup
: RS-232C USB
OFF : ON
TIP
The numbers that can be used for the "Projector ID" setting are from
"1" to "9". "Projector ID" cannot be set to "0".