Epson EMP-7950 - Manual (Page 55)

54 Adjusting the Image Quality
User’s Guide
l
If vertical stripes appear in the projected images,
and this cannot be fixed using automatic setup,
you will need to adjust the
trackingg manually
using the following procedure.
PROCEDURE
Tracking adjustment can be carried out using either the projector's
control panel or the configuration menus. This procedure explains
how to use the projector's control panel to adjust the tracking.
For adjustment using the configuration menus:
See "Video" - "Tracking"
p.78
Press the following buttons to adjust the tracking value until the
vertical stripes disappear from the projected images.
While holding down the [Shift] button on the projector's
control panel, press the [ ] button.
The tracking value increases each time the button is pressed.
While holding down the [Shift] button on the projector's
control panel, press the [ ] button.
The tracking value decreases each time the button is pressed.
Adjusting the Tracking
Projector
Projector
TIP
The images will flash when continuous tracking adjustment is carried
out, but this is normal.