Epson EMP-7950 - Manual (Page 84)

83 Using the Configuration Menu Functions Using the Configuration Menu Functions
User’s Guide
"Audio" Menu
Advanced2
+ - Volume Volume 15
Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
:
[Menu]: Exit [ ]: Enter [ ]: Select
Reset Execute
+ - Treble 0 :
+ - Bass Bass 0 :
Effect
Computer/DVI Audio Input :
Computer/DVI Computer DVI
Sub-menu Function Default
Computer/
DVI Audio
Input Use this command to specify the [Computer] port or [DVI]
port as the video port being used so that sound is input to
the associated [Audio] port.
•Computer/DVI: The sound that are being input are output
regardless of the image signal that is
selected.
•Computer : The [Audio] port only works when
images from the [Computer] port are
being projected.
•DVI : The [Audio] port only works when
images from the [DVI] port are being
projected.
Computer/DVI
Volume Adjusts the volume. 15
Treble Adjusts the intensity of the treble range. Median value (0)
Bass Adjusts the intensity of the bass range. Median value (0)
Reset Resets all adjustments values for the "Audio" menu
functions to their default settings.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
p.95
-
TIP
The "Audio" menu settings are saved individually for each input signal source.