Epson EMP-7950 - Manual (Page 64)

63
User’s Guide
Functions for Enhancing Projection
This section describes the various useful functions that can be used to enhance
presentations.
A/V Mute Function
This function momentarily pauses the images and sound.
For example, it can be used when you do not wish to show details of
operations such as selecting different files while computer images are
being projected.
However, if you use this function when projecting moving images, the
images and sound will still continue to be played back by the source, and
you cannot return to the point where the A/V Mute function was activated.
PROCEDURE
Press the [A/V Mute] button on either the remote control
or the projector's control panel.
The images and sound will then be paused.
Press the [A/V Mute] button once more to continue normal
projection.
You can also continue normal projection by pressing the [ESC] key
on either the remote control or the projector's control panel.
You can use the "A/V Mute" command in the "Setting" menu to set
the screen appearance when the images and sound have been paused
to any one of the following three settings.
p.86
Remote control
Default setting
Solid black Solid blue User's logo
TIP
• The default user's logo is the EPSON logo. You can change the
user's logo by recording and setting your own logo. p.148
• When the A/V Mute function is being used, the "Brightness
Control" setting in the "Setting" menu to will automatically change
to "Low". When the A/V mute function is cancelled, the "Brightness
Control" setting will return to the original setting.