Epson EMP-7950 - Manual (Page 92)

91 Using the Configuration Menu Functions Using the Configuration Menu Functions
User’s Guide
Standby
Mode Set to "Network ON" to use network monitoring and
control functions and the standby monitor out function
while the projector is in standby mode.
To enable the new settings, turn the projector's power off
and wait until the
cool-downg is finished.
*When set to "Network ON", the Power indicator will flash
orange and then remain orange after disconnecting the
power plug and reinserting it into the electrical outlet.
Network OFF
Language Sets the language for message displays.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel and
choose the setting.
English
(Varies
depending on
country of
purchase)
Reset Resets all adjustments values for the "Advanced1" menu
functions except for the "Rear Proj.", "Ceiling" and
"Language" settings to their default settings.
This cannot be reset to the initial setting if the "User's Logo
Protect" function of Password Protect has been set to "ON"
and "Startup Screen" is set to "OFF".
p.61
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
p.95
-
Sub-menu Function Default