Wireless mouse function), Using the remote control to operate the mouse, Pointer (wireless mouse function) – Epson EMP-7950 User Manual
Page 24: P.23
23
Connecting to a Computer
User’s Guide
Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse Function)
You can use the remote control as a wireless mouse to control the mouse
pointer on the screen by using the accessory
cable to connect the
USB port of the computer to the [USB] port at the rear of the projector.
* When using the remote control as a wireless mouse, the [Page ] and
[Page ] buttons on the remote control can be used to scroll back and
forth through slides when projecting a PowerPoint presentation.
Computer
Mouse used
Applicable cable
Windows 98/2000/Me/
XP Home Edition/
XP Professional
USB mouse
USB cable (accessory)
Macintosh
(OS 8.6–9.2/10.0–10.3)
USB mouse
USB cable (accessory)
USB cable
(accessory)
To [USB] port
*For the EMP-7950
To [USB TypeB] port
To USB port
TIP
• The USB cable can only be connected to computers with a standard
USB interface. If using a computer which is running Windows, the
computer must have had a full version of Windows 98/2000/Me/XP
Home Edition/XP Professional installed. If the computer is running
a version of Windows 98/2000/Me/XP Home Edition/XP
Professional that has been upgraded from an earlier version of
Windows, correct operation cannot be guaranteed.
• It may not be possible to use the wireless mouse function under some
versions of both the Windows and Macintosh operating systems.
• Some computer settings may have to be changed in order for the
mouse function to be used. Consult the documentation for the
computer for further details.