Epson EMP-7950 - Manual (Page 74)

73 Functions for Enhancing Projection
User’s Guide
You can switch the aspect ratiog between 4:3 and 16:9 when component
videog , S-Videog and composite videog signals are being projected.
Images that have been recorded in digital video and DVD images can be
projected in 16:9 wide-screen format.
PROCEDURE
The display changes each time you press the [Resize]
button on either the remote control or the projector's
control panel.
For SDTVg
When images that are output in 16:9 format are displayed at an aspect ratio
of 4:3, the images are squeezed horizontally so that they appear vertically
elongated.
For HDTVg
When images that are output in 16:9 format are displayed at an aspect ratio
of 4:3, the images are resized so that they fill the full vertical area of the
screen, and the left and right edges are truncated and are not displayed.
Projecting Wide-screen Images from Video Equipment
Remote control
When images in squeeze
mode are projected at 16:9 When images in squeeze
modeg are projected at 4:3
When images in squeeze
mode are projected at 4:3 When images in squeeze
mode are projected at 16:9
TIP
When projecting images with an aspect ratio of 16:9, the image
position will change as follows each time you press the [Resize] button
while holding down the [Shift] button on the projector's control panel.
Centre display Top edge display
Bottom edge display