SMA SMC 9000TL Installation - Manual (Page 50)

50 SMC9-11TLRP-IA-en-51 Installation Manual
7 Configuration SMA Solar Technology AG
You can change the display language of the inverter. Various languages are available depending on
the country data set selected.
1. Disconnect the inverter from all voltage sources (see section 9).
2. Select the required language via the two switches:
3. Commission the inverter (see section 8 "Commissioning", page 51).
7.4 Changing the Display Language
Figure 14: Two switches at the bottom of the display assembly
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A