4 commissioning the sunny beam, Commissioning the sunny beam – SMA BEAM-BT-10 User Manual
Page 19
Advertising
![background image](/files/818756/content/doc019.png)
SMA Solar Technology AG
Commissioning
User Manual
BeamBT-BEN094911
19
6.4 Commissioning the Sunny Beam
The first steps are described in detail, so that you can familiarize yourself with the controls of Sunny
Beam. Sunny Beam will guide you through the commissioning procedure. If a fault occurs during
commissioning, you can restart commissioning by pressing the push button for about 10 seconds, until
the SMA logo is displayed.
1. Insert the included batteries into the battery compartment of the Sunny Beam according to the
indication.
2. Press the button.
☑ The start screen appears.
3. Press the button.
Advertising