SMA BEAM-BT-10 - Manual (Page 60)

Operation SMA Solar Technology AG
60 BeamBT-BEN094911 User Manual
7.11.3 Repeating the System Search
You need to repeat the system search, e.g., if one or more inverters have been added to the PV system.
When performing the system search, all CSV files and settings in the Sunny Beam will be saved.
3. Select "Settings > Plant > New plant search".
4. Select "Start detection" to start the system search.
☑ The system search will begin.
Resetting the Sunny Beam before performing the system search is necessary in
the following cases:
• You want to register an external PV system with the Sunny Beam.
• An inverter has been exchanged in the PV system.
A reset is necessary in order for the data from the previously registered PV system or the
exchanged inverter to be deleted from the Sunny Beam.
No search for Bluetooth PV systems with NetID 1
The Sunny Beam cannot search for Bluetooth PV systems with the NetID 1. Only NetIDs
from 2 to 9 and from A to F are possible.
If Then
A free NetID is already set on the devices of
your Bluetooth PV system. Perform the steps from section "Search for your
own Bluetooth PV system" (page 26).
No free NetID has been set on the devices in
your Bluetooth PV system. Perform the steps from section "Determining
free NetID" (page 24).