SMA BEAM-BT-10 User Manual
Page 74
Advertising
Maintenance and Care
SMA Solar Technology AG
74
BeamBT-BEN094911
User Manual
1. Replace the batteries as illustrated below.
2. Press the button to switch the Sunny Beam on.
☑ The Sunny Beam checks whether an update file has been saved on the Sunny Beam.
☑ The chart view for the complete system is displayed. The batteries have been replaced.
Make sure that the time and date settings of the Sunny Beam are correct. If the settings are incorrect,
change time and date (section 7.13 "Time Settings" (page 67)).
If
Then
An update file has been saved on the Sunny
Beam.
The Sunny Beam will perform the update.
No update file has been saved on the Sunny
Beam.
The Sunny Beam will start up.
Advertising