Automatic switching off the display – SMA BEAM-BT-10 User Manual
Page 33
SMA Solar Technology AG
Operation
User Manual
BeamBT-BEN094911
33
7.1.1 Switching on the Display / Calling up the Main Menu
You can switch on the display by pressing or turning the button. The Sunny Beam opens the first chart,
"Power today", in the chart view for the complete system. The chart view is described in section
7.3 "Chart View" (page 35).
You can switch from the chart view to the main menu by pressing the button. After 3 minutes, the Sunny
Beam will always switch from the menu to the chart "Power today" for the complete system
automatically, unless the display switches off automatically first.
Automatic switching off the display
To save energy the Sunny Beam will automatically switch off its display after being idle for 1 minute.
You can change this duration as described in section 7.8.2 "Changing the Display Switch-Off"
(page 48).