SMA BEAM-BT-10 - Manual (Page 25)

SMA Solar Technology AG Commissioning
User Manual BeamBT-BEN094911 25
26. Press the button.
☑ The system search will begin.
☑ The Sunny Beam detects all Bluetooth PV systems
within range and lists the NetIDs of the detected
Bluetooth PV systems. In the list, the NetIDs are sorted
according to connection quality. The NetID with the
best connection quality is placed at the top. The listed
NetIDs are already in use on Bluetooth PV systems in
the vicinity. You may not use these NetIDs.
– If the Sunny Beam does not list any NetIDs, there are no Bluetooth PV systems within the
radio range of the Sunny Beam. All NetIDs are free.
27. Note down the NetIDs already in use, or cross them out in the following illustration.
28. Repeat the system search with the Sunny Beam for each device in the PV system and at the
desired installation site of the Sunny Beam itself. Note down the NetIDs already in use, or cross
them out in the following illustration.
Sunny Beam cannot detect any devices with the NetID set to 1. Therefore, NetID 1 has already
been crossed out in this illustration.
29. Once the system search has been carried out for all the devices, choose a NetID for your PV
systems which was not displayed by the Sunny Beam.
☑ The free NetID is determined.