8 display settings, 1 changing the contrast, 2 changing the display switch-off – SMA BEAM-BT-10 User Manual
Page 48: Display settings, Changing the contrast, Changing the display switch-off, 8 display settings 7.8.1 changing the contrast
Advertising
![background image](/files/818756/content/doc048.png)
Operation
SMA Solar Technology AG
48
BeamBT-BEN094911
User Manual
7.8 Display Settings
7.8.1 Changing the Contrast
1. Select "Settings > Display options > Contrast".
2. Select "Upper contrast" or "Lower contrast".
3. Set the contrast.
☑ The contrast is changed.
7.8.2 Changing the Display Switch-Off
To save energy the Sunny Beam will automatically switch off its display after being idle for 1 minute.
You can adjust the duration or set the display to always remain switched on (Setting "-").
1. Select "Settings > Display options > Display off after:".
2. Set the interval.
☑ The switch-off has been set up.
Power consumption
The longer the display remains switched on, the higher the power consumption of the
Sunny Beam.
Advertising