SMA BEAM-BT-10 - Manual (Page 61)

SMA Solar Technology AG Operation
User Manual BeamBT-BEN094911 61
7.11.4 Changing the Device Name
The device names of the detected inverters are displayed as serial numbers in the Sunny Beam. You
can change the serial numbers to a descriptive device name, in order to better distinguish between
the inverters in the Sunny Beam. The names you give the devices are only shown on the Sunny Beam
and will not be transferred to the inverters or displayed on any other communication device (e.g.
Sunny Explorer).
1. Select "Settings > PV plant > Change device name".
☑ The list of inverters that the Sunny Beam manages is
displayed.
2. Select the serial number or a previously assigned device
name.
☑ The input page appears.
3. Select the button with the arrow and press the button
again to delete the set device name.
4. In order to enter the new device name, turn the button until the desired character is highlighted.
Then press the button in order to select the character.
Arrow: deletes the character which was entered last.
Cross: cancels the input action.
Checkmark: the entered device name is saved.