Yaskawa 1000 Series Drive Option - MECHATROLINK-II Technical Manual - Manual (Page 5)

1 Preface and Safety
YASKAWA ELECTRIC SIEP C730600 50A YASKAWA AC Drive-Option Card MECHATROLINK-II Technical Manual 5
1 Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection
and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa
accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances
should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without
exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All
systems or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with
appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa
must be promptly provided to the end user. Yaskawa offers an express warranty only as to the quality of its products in
conforming to standards and specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR
IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims
arising from misapplication of its products.
‹ Applicable Documentation
The following manuals are available for SI-T3 MECHATROLINK-II Option card:
For the drive setup, refer to one of the documentation listed below.
‹ Terms
Note: Indicates supplementary information that Yaskawa highly recommends be followed, even though equipment may not be at risk.
‹ Registered Trademarks
• MECHATROLINK-I/MECHATROLINK-II is a registered trademark of the MECHATROLINK Members Association
(MMA).
• Other company names and product names listed in this manual are registered trademarks of those companies.
Option Card
YASKAWA AC Drive-Option Card MECHATROLINK-II Installation Manual
Manual No. : TOBPC73060050
Read this manual first.
The installation manual is packaged with the MECHATROLINK-II Option and contains a basic overview of wiring,
settings, functions, and fault diagnoses.
YASKAWA AC Drive-Option Card MECHATROLINK-II Technical Manual (this book)
Manual No. : SIEPC73060050
The technical manual contains detailed information.
To obtain the technical manual, access these sites.
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
U.S.: http://www.yaskawa.com
Other areas: contact a Yaskawa representative.
Yaskawa Drive
Refer to the manual of the drive this option card is being used with.
The instruction manual for the drive covers basic installation, wiring, operation procedures, functions, troubleshooting,
and maintenance information.
It also includes important information on parameter settings and how to tune the drive.
A Quick Start Guide is included with the drive. For the more detailed Technical Manual, visit Yaskawa’s homepage or
contact a Yaskawa representative.
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
U.S.: http://www.yaskawa.com
Other areas: contact a Yaskawa representative
MECHATROLINK-II Option: Yaskawa AC Drive -SI-T3 MECHATROLINK-II option card
SI-T3