Yaskawa 1000 Series Drive Option - Profibus-DP Technical Manual - Manual (Page 16)

5 Installation Procedure
16 YASKAWA ELECTRIC SIEP C730600 42B 1000-Series Option SI-P3 Technical Manual
9. Replace and secure the front covers of the drive (C, F) and replace the digital operator (D).
Figure 11
Figure 11 Replace the Front Covers and Digital Operator
Note: Take proper precautions when wiring the option so that the front covers will easily fit back onto the drive. Make sure no cables
are pinched between the front covers and the drive when replacing the covers.
10. Set drive parameters in Table 8 for proper option performance. Be sure to set parameter F6-30 to a node
address unique to the network.
F
C
D