Yaskawa 1000 Series Drive Option - Profibus-DP Technical Manual - Manual (Page 30)

8 Parameter Process Data Object Formats
30 YASKAWA ELECTRIC SIEP C730600 42B 1000-Series Option SI-P3 Technical Manual
„ HSW/HIW
„ Task ID
„ Response ID
‹ SI-P3 Device Data
Bit PPO Write PPO Read
0 to 15 Setting Frequency ( ±10000/100%) Output Frequency or Motor speed (with PG) ( ±10000/100%)
ID Description
0 No action
1 Request parameter value
2 Change parameter value (word)
3 Change parameter value (double word)
6 Request parameter value from array
7 Change parameter value in array (word)
8 Change parameter value in array (double word)
9 Request number of array elements
ID Description
0 No action
1 Transfer parameter value (word)
2 Transfer parameter value (double word)
4 Transfer parameter value (array word)
5 Transfer parameter value (array double word)
6 Transfer number of array element
7 Task cannot be executed (with error number)
Parameter Setting Value Note
GSD_Revision 3 GSD file revision 3.0.
Vendor_Name “YASKAWA ELECTRIC”
Model_Name “PROFIBUS-DP INTERFACE CARD SI-P3”
Ident_Number 0x0ACF
FMS_supp 0 PROFIBUS-FMS not supported
Protocol_Ident 0 PROFIBUS-DP supported
Station_Type 0 DP-Slave.
Slave_Family 3
Revision
“V1.0” Device revision 1.0
Hardware_Release “V1.0” Hardware revision 1.0
Software_Release “V1.0” Software revision 1.0
Implementation_type “DPC31” DP protocol
Redundancy 0 Redundancy NOT supported
Repeater_Ctrl_Sig 2 Supported, TTL level
24V_Pins 0 No external 24 Volt input
Set_Slave_Add_supp = 1 1 Station address is set remotely
Auto_Baud_supp 1 Automatic baud rate select
9.6_supp 1 9600 Baud
19.2_supp 1 19.2 kBaud
45.45_supp 1 45.45 kBaud
93.75_supp 1 93.75 kBaud
187.5_supp 1 187.5 kBaud
500_supp 1 500 kBaud
1.5M_supp 1 1.5 MBaud
3M_supp 1 3 MBaud
6M_supp 1 6 MBaud
12M_supp 1 12 MBaud