Yaskawa SI-ES3 for V1000 - Manual (Page 17)

6 Installation Procedure
YASKAWA Europe YEU TOEP C710606 98A - V1000 Option EtherCAT - Installation Manual EN 17
Do not operate damaged equipment.
Failure to comply may cause further damage to the equipment.
Do not connect or operate any equipment with visible damage or missing parts.
Tighten all terminal screws to the specified tightening torque.
Loose electrical connections could result in death or serious injury by fire due to overheating of
electrical connections.
Do not use unshielded cable for control wiring.
Failure to comply may cause electrical interference resulting in poor system performance.
Use shielded twisted-pair wires and ground the shield to the ground terminal of the drive.
Properly connect all pins and connectors.
Failure to comply may prevent proper operation and possibly damage equipment.
Check wiring to ensure that all connections are correct after installing the option card and
connecting any other devices.
Failure to comply may result in damage to the option card.
NOTICE