Yaskawa Motion Control G7 Drive Software - Manual (Page 21)

Date: 05/16/08, Rev: 08-05 Page 21 of 38 TM.G7SW.117
ABSOLUTE INCREMENTAL ENCODER W/SEPARATE INCREMENTAL ENCODER: For use with a TR-
electronic, series “CE-65” serial (ISI) encoder. Upon power-up, the drive must read the actual position of the serial
encoder. This process usually is completed within a few seconds. As an option, the encoder can be monitored and
configured directly using a PC, an RS-232 to RS-485 converter, and the TR Electronic EPROGW32 program.
Note: The wiring below is for a “TR Electronic” brand encoder model #: CE65M-G-4096/4096-D23BB-R10HR/HX
4096 counts / rev, +/-2048 revolutions (multi-turn).
Figure 7b: Absolute Incremental Encoder Wiring – Dual Encoders (P3-01 = 4)