Magnum Energy AC Load Diversion Controller (ACLD-40) - Manual (Page 27)

©
2015 Sensata Technologies Page 20
Installation
2.9.2 Compatible Diversion Loads
Below is a list of compatible loads that may be used with the ACLD.
Info: The diversion load must be sized at 110% or larger than the RE source ( 4800
watts max), and the RE source must be limited to 10% below the continuous power
of the battery-based inverter used. For MS-PAE Series inverters, the MS4024PAE is
limited to ≤3600 watts and the MS4448PAE is limited to ≤4000 watts.
Power Resistors:
Ohms Watts Part Number Manufacturer
15 3840 PR4410-13A PowerOhm
15 3150 PR15R3K15 PowerOhm
14 3150 PR14R3K15 PowerOhm
14 2657 222-8 IPC
13 3328 PR13R3K32 PowerOhm
13 2800 PF13R2K80 PowerOhm
12
3888 PR5505-16A PowerOhm
12 3888 PR4405-14 PowerOhm
12 3072 PR12R3K07 PowerOhm
Resistor assemblies listed above are manufactured by IPC Power Resistors Inc. (www.ipcresistors.
com) and Powerohm Resistors Inc. (www.powerohm.com). Available resistor assembly options
from these companies include an overtemperature switch, auxiliary terminal blocks, and custom
enclosures.
Water Heaters:
Size Watts Part Number Manufacturer
28-Gallon 3500 E2F30LD035V Whirlpool
30-Gallon 3500 E2F30HD035V Whirlpool
Air Heaters/Resistor Boxes:
Watts Part Number Manufacturer
2160 L2000W48V Coleman Air (www.colemanair.us)
3000 W3024 Infratech (www.infratech-usa.com)
4000 WD4024 Infratech (www.infratech-usa.com)
4000 W4024 Infratech (www.infratech-usa.com)
4800 BRU-4.8KW/12R-J EAGTOP (www.eagtop.com)
Baseboard Heaters:
Watts Part Number Manufacturer
2500 8F2025 Cadet
2500 LC6025W31 Dimplex