Magnum Energy AC Load Diversion Controller (ACLD-40) - Manual (Page 42)

Page 35
©
2015 Sensata Technologies
Appendix A – Specifi cations and Optional Equipment
Appendix A – Specifi cations and Optional Equipment
A-1 ACLD-40 Load Diversion Controller Specifi cations
Electrical Specifi cations
Input Voltage (from inverter & grid) 240 VAC ± 10%
Output Voltage (to load) 0 - 240 VDC
Output Waveform (to load) Full Rectifi ed Sinewave
Nominal Frequency Input 50 or 60 Hz
Continuous Rated Power 4000 VA @ 25°C
Continuous Rated Current 20 amps AC @ 25°C
Absolute Maximum Current
(Input and Output to Loads)
30 amps AC
Diversion Load Specifi cations
Acceptable Load Type Pure Resistive
Primary Load Rated Power* 2500 - 4500W
Secondary Load Rated Power* 3500 - 4500W
* one of the loads must be 110% of renewable source power or greater and must always
stay on (cannot turn off).
Rated Voltage 208VAC, 230VAC, or 240VAC
General Features and Capabilities
Temperature Compensated Regulation With BTS connected to inverter
Internal Cooling Uses ball-bearing fan for long life
Integrated Electronic Protection Overcurrent and overtemperature
Safety Listings
ETL listed to UL/cUL 1741 (2nd edition),
CSA C22.2 No. 107.1-01
Warranty
Three years (Five years when purchased with and
installed on a MMP or MP enclosure system)
Operating Temperature -20°C to +60°C (-4°F to 140°F)
Non-operating Temperature -40°C to +70°C (-40°F to 158°F)
Operating Humidity 0 to 95% RH non-condensing
Physical Specifi cations
Enclosure Type Enclosure Environmental Rating Type 1 (indoor only)
Unit Dimensions (width x height x depth) 13” x 13.75” x 7” (33 cm x 34.9 cm x 17.8 cm)
Shipping Dimensions (w x h x d) 16” x 17” x 10.5” (40.6 cm x 43.2 cm x 26.7 cm)
Mounting
Top of shelf or table or specifi cally mounted on a
vertical surface (wall)
Weight Unit: 20 lb (9.1 kg) / Shipping: 23 lb (10.5 kg)
Max Operating Altitude 15,000 ft (4570 m)
Unless otherwise noted, specifi cations @ 77°F (25°C) – subject to change without notice.