Xerox Phaser 3330 - Manual (Page 103)

B
Regulatory Information
Basic Regulations
Xerox has tested this printer to electromagnetic emission and immunity standards. These
standards are designed to mitigate interference caused or received by this printer in a
typical office environment.
ENERGY STAR ® Qualified Product
The Phaser ® 3330 is ENERGY STAR ® qualified under the ENERGY STAR Program
Requirements for Imaging Equipment.
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between the
United States, European Union, and Japanese governments and the office equip-
ment industry to promote energy-efficient copiers, printers, fax, multifunction
printers, personal computers, and monitors. Reducing product energy consumption
helps combat smog, acid rain, and long-term changes to the climate by decreasing
the emissions that result from generating electricity.
Xerox ENERGY STAR equipment is preset at the factory. Your printer is delivered
with the timer, for switching to Power Saver Mode from the last copy/print out, set
at 1 or 2 minutes. A more detailed description of this feature can be found in the
Power Saver section of this guide.
United States FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy. If it is not installed and used in accordance with these instructions,
it may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his/her own expense.
B-1 Xerox ® Phaser ® 3330 Printer
User Guide