Xerox Phaser 3330 - Manual (Page 68)

4. Lift and carry the printer as shown in the illustration.
• To prevent dropping or tipping the printer, hold the printer with one hand
underneath to hold the printer and the other hand on top to stabilize it.
• Repack the printer and its options using the original packing material and boxes
or a Xerox Repackaging Kit. For a repacking kit and instructions, go to
www.xerox.com/office/3330support .
• When moving the printer over a long distance, remove the toner cartridges and
drum cartridges to prevent toner from spilling.
Caution
Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
® Warranty, Service Agreement, or Total Satisfaction Guarantee.
The Xerox ® Warranty, Service Agreement, or Total Satisfaction Guarantee do not
cover damage to the printer caused by improper moving.
5. After moving the printer:
a) Reinstall any parts you removed.
b) Reconnect the printer to the cables and power cord.
c) Plug in and turn on the printer.
Billing and Usage Counters Information
Billing and printer usage information appears on the Billing Meters information screen
at the control panel display. The impression counts shown are used for billing.
To view Billing and Usage information:
1. At the printer control panel, press the Menu button.
2. Press the Down arrow button to select Information.
3. Press the Right arrow button, then use the Down arrow button to select Billing Meters.
4. Press the Right arrow button to view a list of information types.
Xerox ® Phaser ® 3330 Printer 6-6
User Guide
Maintenance