Xerox Phaser 3330 - Manual (Page 44)

Loading Paper
Loading Paper in the Bypass Tray
To load paper in the bypass tray:
1. Open the bypass tray.
If the bypass tray is loaded with paper already, remove any paper that is a different
size or type.
2. Move the width guides to the edges of the tray.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a
level surface. This procedure separates any sheets that are stuck together and reduces
the possibility of jams.
Note
To avoid jams and misfeeds, do not remove paper from its packaging until you are
ready to use it.
Xerox ® Phaser ® 3330 Printer 4-6
User Guide
Paper and Media