Xerox Phaser 3330 - Manual (Page 67)

Replacing a Drum Cartridge
When a drum cartridge approaches the end of its usable life span, the control panel
displays a drum cartridge low message. When a drum cartridge is empty, the printer
stops and displays a message on the control panel.
Note
Each drum cartridge includes installation instructions.
Cause and Solution Printer Status Message
The drum cartridge is low. Order a new drum
cartridge. Image Unit Low Status. Ensure that a new
Drum Cartridge is available.
The drum cartridge must be replaced. Open the
front cover, then replace the drum cartridge. No message but the printer stops printing.
Recycling Supplies
For more information on the Xerox ® supplies recycling program, go to:
www.xerox.com/gwa .
Moving the Printer
Warning
To prevent electric shock, never touch the power plug with wet hands. When removing
the power cord, ensure that you pull the plug and not the cord. Pulling the cord can
damage it, which can lead to fire or electric shock.
Warning
When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or
right. Tilting the printer more than 10 degrees can cause toner spillage.
Warning
If the optional 550-sheet feeder is installed, uninstall it before you move the printer. If
the optional 550-sheet feeder is not fixed to the printer securely, it can fall to the ground
and cause injury.
Follow these instructions when moving the printer:
1. Turn off the printer and wait for the printer to shut down. For details, see
Turning
On/Off the Printer .
2. Remove any paper or other media from the output tray.
3. When moving the printer from one location to another, use caution to ensure that
the printer does not topple.
6-5 Xerox ® Phaser ® 3330 Printer
User Guide
Maintenance