Problems relating to images, No images appear, P.103 – Epson Z8250NL User Manual
Page 103: Projection stops automatically, Problem solving
Problem Solving
103
Problems relating to images
No images appear
Moving images are not displayed (only the moving image portion turns black).
Projection stops automatically
Check
Remedy
Did you press the [t] button?
Press the [t] button to turn the power on.
Are the indicators switched off?
The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly.
Check that your electrical outlet or power source is functioning correctly.
Is Shutter active?
Press the [Shutter] button on the remote control to cancel Shutter. s
Are the configuration menu settings correct?
Reset All of the settings. s Reset Menu - Reset All
Is the projected image completely black?
Only when projecting computer images
Some input images, such as screen savers, may be completely black.
Is the image signal format setting correct?
Only when projecting images from a video source
Change the setting according to the signal for the connected equipment. s Signal Menu - Video
Signal
Check
Remedy
Is the computer's image signal being output to the LCD and
the monitor?
Only when projecting images from a laptop computer
or a computer with a built-in LCD screen
Change the image signal to external output only. s Check your computer's documentation.
Check
Remedy
Is Sleep Mode set to On?
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to
Off. s Extended Menu - Operation - Sleep Mode