Epson Z8250NL - Manual (Page 187)

Connecting to External Equipment
187
Connecting to External Equipment
Connecting a LAN Cable
Connect with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
Caution
To prevent malfunctions, use a category 5 shielded LAN cable.
Connecting to an External Monitor
You can display computer on an external monitor connected to the
projector and the projection screen at the same time. You can check
projected images on an external monitor when giving presentations even
if you cannot see the screen. Connect using the cable supplied with the
external monitor.
q • Only analog RGB signals from a computer connected to the Computer
input port or the BNC input port can be displayed on an external monitor.
Images from equipment connected to other ports and component video
signals cannot be displayed.
• The image cannot be displayed on an external monitor when the projector
is on standby.
• Setting gauges such as Keystone, the configuration menu, or Help screens
are not output to the external monitor. Connected
equipment
Connecting cable Projector port
LAN port on network
hub LAN cable (commercially
available) LAN port
Connected
equipment
Connecting cable Projector port
Monitor Cable supplied with
monitor Monitor Out port