Epson Z8250NL - Manual (Page 107)

Problem Solving
107
Images appear dark
Problems when projection starts
No power supplied
Are the Color Saturation and Tint adjusted correctly?
Only when projecting images from a video source
Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color
Saturation, Tint
p.60
Check Remedy
Is the image Brightness set correctly? Adjust the Brightness and Power Consumption settings from the configuration menu.
s Image Menu - Brightness p.60 s Settings Menu - Power Consumption p.65
Is Contrast g adjusted correctly? Adjust the Contrast setting from the configuration menu.
s Image Menu - Contrast p.60
Is the lamp due for replacement? When the lamp is nearly ready for replacement, the images become darker and the color quality
becomes poorer. When this happens, replace the lamp with a new lamp. s
p.119
Is Multi-Projection set to On? Brightness Level or Brightness Correct. on Multi-Projection could be set.
If not projecting from multiple projectors, set Multi-Projection to Off. s Extended Menu -
Multi-Projection
p.67
Check Remedy
Did you press the [t] button? Press the [t] button to turn the power on.
Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally.
Disconnect and then reconnect the power cable.
Check that your electrical outlet or power source is functioning correctly.
Check Remedy