Epson Z8250NL - Manual (Page 74)

Network Menu
74
Wireless LAN Menu
To connect the projector to a computer using a wireless LAN, install the Wireless LAN unit (V12H418P12). s p.192
Sub Menu Function
Wireless LAN Power Set this parameter to On when connecting the projector and a computer via a wireless LAN. If you do not want to connect via a
wireless LAN, set this parameter to Off to prevent unauthorized access by others.
Wi-Fi Protected Setup When using a WPS (Wi-Fi Protected Setup) g compatible access point via a wireless LAN, you can easily connect the projector to the
access point and make security settings. s p.146
Wireless LAN system Sets the wireless LAN system. Normally this should be set to 802.11b/g/n. The connection method is selected automatically
according to the access point settings.
In an area that does not support 802.11n, only 802.11b/g is displayed.
Connection Mode Set the connection mode to use when connecting the projector and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by the projector and computer. It is used with EasyMP Network
Projection. If SSID Auto Setting is On, the projector becomes an access point. If it is set to Off, the network is created in Ad hoc
mode
g .
If you select Advanced, the connection is established by the installed access point and Infrastructure mode g .
SSID Auto Setting If Connection Mode is set to Quick, when you set this to On, you can search for the projector more quickly from among multiple
projectors. SSID is set automatically.
When connecting to multiple projectors from 1 computer in Quick mode, set this to Off, and set the same SSID in all the projectors
that will connect.