Epson Z8250NL - Manual (Page 31)

Changing the Aspect Ratio of the Projected Image
31
q If parts of the image are missing or it cannot project everything, set the
Resolution
setting to Wide or Normal from the configuration menu
depending on the size of the computer panel. s p.62
Changing the Aspect Mode
(PowerLite Pro Z8150NL/Z8250NL/Z8255NL)
Projecting images from video equipment
Each time the Aspect button on the remote control is pressed, the aspect
mode changes in the order Auto, 4:3, 16:9, 16:9 (Up), and 16:9 (Down).
s
p.27
When inputting a 720p/1080i/1080p signal and the aspect mode is set to
4:3
, a 4:3 zoom will be applied (the right and left sides of the image will
be cut off).
Full
Zoom
Native
Aspect
mode
Input Signal
XGA
1024X768
(4:3)
WXGA
1280X800
(16:10)
SXGA
1280X1024
(5:4)
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
Auto
B 4:3
C 16:9
D 16:9 (Up)
E 16:9 (Down)