Epson Z8250NL - Manual (Page 191)

Installing Optional and Supplied Accessories
191
C
Replace the front cover.
D
Replace the interface cover.
Caution
• Install the front cover before using the projector.
• Store the projector with the lens unit installed.
If the projector is stored without the lens unit, dust and dirt may get inside the
projector and cause malfunctions or lower the quality of projection.
A Install the cover along the guide.
B Tighten the screw. (Thumb screw available on the PowerLite Pro
Z8255NL/Z8455WUNL only.)
C Tighten the two screws.
A Install the cover along the guide.
B Tighten the screw.