Epson Z8250NL - Manual (Page 72)

Network Menu
72
Soft Keyboard Operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed.
Use the [h] button on the remote control or [w/
], [v/ ], [</ ],
and [>/ ] on the projector to move the cursor to the desired key, and
then press the [Enter] button to enter the alphanumeric. Enter figures by
holding down the [Num] button on the remote control, and pressing the
numeric buttons. After inputting, press [Finish] on the keyboard to
confirm your input. Press [Cancel] on the keyboard to cancel your input.
• Each time the [CAPS] key is selected and the [Enter] button is pressed,
it switches between uppercase and lowercase letters.
• Each time the [SYM1/2] key is selected and the [Enter] button is
pressed, it switches the symbol keys in the section enclosed in the box.