Epson Z8250NL - Manual (Page 89)

Info Menu (Display Only)
89
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image
signal or input source being projected as shown in the following screen shots.
RGB Signal/Component Video g Signal Composite video g Signal/S-Video g Signal LAN
Sub Menu Function
Lamp Hours You can display the cumulative lamp operating time
*
.
When it reaches the lamp warning time, the characters are displayed in yellow.
Lamp Status The following icons show the status of the lamps.
: Lighted : Disable
When is displayed, the lamp is not operating normally. See "Reading the Indicators". s p.96
Source You can display the Source name for the connected equipment currently being projected.
Input Signal You can display the Input Signal selected in the Signal menu.
Resolution You can display the Resolution.
Video Signal You can display the Video Signal selected in the Signal menu.
Refresh Rate You can display the Refresh Rate g .
Sync Info You can display the image signal information.
This information may be needed if service is required.