P.106, Image colors are not right, Problem solving – Epson Z8250NL User Manual
Page 106
Problem Solving
106
The image is truncated (large) or small, or the aspect is not suitable
Image colors are not right
Check
Remedy
Is the aspect adjusted correctly?
Press the [Aspect] button on the remote control to select an aspect suitable for the input source.
s
Is a wide panel computer image being projected?
Only when projecting computer images
Change the setting according to the signal for the connected equipment. s Signal Menu - Resolution
Is the image still being enlarged by E-Zoom?
Press the [Esc] button on the remote control to cancel E-Zoom. s
Is Scale set to On?
Set Scale to Off on the configuration menu. s Signal Menu - Scale
Is Position adjusted correctly?
Press the [Auto] button on the remote control or the [Enter] button on the control panel to
automatically adjust the position of projected images from a computer. If the images are not adjusted
correctly after using automatic adjustment, you can make the adjustments using Position from the
configuration menu.
Apart from computer analog RGB signals, you can adjust other signals while projecting by adjusting
Position from the configuration menu. s Signal Menu - Position
Is the computer set for dual display?
Only when projecting computer images
If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of
the image on the computer screen is projected. To display the entire image on the computer screen,
turn off the dual display setting. s Computer video driver documentation
Is the correct resolution selected?
Only when projecting computer images
Set the computer so that the signals being output are compatible with the projector.
s
Check
Remedy
Do the input signal settings match the signals from the
connected device?
Change the setting according to the signal for the connected equipment. s Signal Menu - Input
Signal, Video Signal
Is the image Brightness set correctly?
Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness
Are the cables connected correctly?
Check that all the cables required for projection are securely connected. s
Is Contrast
g
adjusted correctly?
Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast
Is the Color Adjustment correctly?
Adjust the Advanced setting from the configuration menu. s Image Menu - Advanced