Interpreting event ids, P.112, Problem solving – Epson Z8250NL User Manual
Page 112
Problem Solving
112
Interpreting Event IDs
Check the event ID and perform the remedy given below. If the problem cannot be solved, contact the network administrator or one of the following
contact addresses. s
Event ID
Cause
Remedy
0432
0435
Failed to startup EasyMP Network Projection.
Restart the projector.
0434
0481
0482
0485
Network communication is unstable.
Check the status of network communications. Wait for a while and then try
connecting again.
0433
An image that was transferred cannot be reproduced.
Restart EasyMP Network Projection.
0484
Communications was cut off from the computer.
04FE
EasyMP Network Projection ended unexpectedly.
Check the status of network communications. Restart the projector.
04FF
A system error occurred in the projector.
Restart the projector.
0891
The same SSID access point cannot be found.
Set the computer, the access point, and the projector to the same SSID.
0892
The WPA and WPA2 authentication methods are not the
same.
Check the wireless LAN security setting to see if it is correct. s Network Menu -
Security Menu
0893
The WEP, TKIP, and AES encoding methods are not the
same.
0894
Communications was cut off because a connection was
made to the wrong access point.
Check with the network administrator and follow their instructions.
0898
Failed to obtain the DHCP.
Check the DHCP server to see if it is operating correctly and check the LAN cable to
see if it is connected correctly. Turn off DHCP if it is not being used. s Network
Menu - Wireless LAN Menu
0899
Other connection errors
If the problem cannot be solved by restarting the projector or EasyMP Network
Projection, contact one of the following contact addresses. s