Network menu – Epson Z8250NL User Manual
Page 83
Network Menu
83
AMX Device Discovery
When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery
g
. Set
this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
Crestron RoomView
Set this parameter to On only when using Crestron RoomView® to monitor and control the projector over a network. Normally,
leave this parameter set to Off. s "About Crestron RoomView®"
Changes in projector settings take effect upon restarting.
The following functions cannot be used when it is set to On.
• Web Control
• Message Broadcasting (EasyMP Monitor plugin)
Bonjour
To connect to the network by Bonjour, set it to On. For an explanation of the Bonjour service, see the Apple Web site.
http://www.apple.com/
EPSON Message
Broadcasting
You can switch the EPSON Message Broadcasting function to enable or disable.
Download the software and the User’s Guide from the following website.
http://www.epson.com
You can download Message Broadcasting and its Operation Guide from the following Web site.
http://www.epson.com
Sub Menu
Function